Get a quote

Tel: 0039 049 9202276   

ASK FOR A QUOTE

Menu

roll

ST4

, , , , , , , ,

Manual thermal welder 3 or 4 m

ST4
ST4
ST4

This welding machine model is available in versions with useful welding of 3 or 4 meters.

The machine is equipped with an electronic control that allows you to set, by means of a touch-screen panel, all the data necessary for welding.

Using a digital control it was possible to eliminate the door that protects the welding area in order to facilitate visibility during the machining cycle while maintaining the same level of safety.

For the production of mosquito nets, the roll holders for the 50 mm and 10 mm webbing are applied to the welding machine.

In addition to these operations, it is possible to weld the ZIP profile, join fabrics and weld other profiles.

For the production of roller blinds and blackout blinds, an automatic system has recently been added to the welding machine for the execution of a pocket with measures from 3,5 to 10 cm.

The depth of the pocket can be entered directly from the touch-screen without having to manually change anything on the welding machine (optional).

After placing the sheet in position, with a single “START” the complete folding and welding cycle is carried out.

 

Technical information

Maximum length – mm 3600/4600

Maximum depth – mm 900

Max height – mm 1600

Mains voltage – V 380 5 poles

Absorbed power – Kw 5

Operating pressure – Bar 4/5

Weight – kg 400/500

For information on prices and delivery times, you can contact us by phone or email with your requests.

 

ST1500 – ST2000

, , , , , , , ,

1,5 or 2 m Manual hot welder

ST1500 – ST2000
ST1500 – ST2000
ST1500 – ST2000

The ST is a manual thermal welding machine dedicated to the production of mosquito nets.

The 220 V voltage and low consumption (2 kw) allows this welding machine to be used even in companies with small systems, while maintaining a high level of quality and quantity of welding.

The manual welding machine is equipped with an electronic control that allows you to set, by means of a touch-screen panel, the few data necessary to carry out the welding. There are no mechanical timers as they are subject to wear and could lead to reliability problems.

The welding machine is equipped with 1,5 or 2 m and 10 mm wide electrodes.
The fixed support bench is 3 or 4 meters long.
To increase the ease of use, it is possible to have the fixed support bench of 6 meters.

For the production of mosquito nets, it is possible to weld both the pocket on the bottom for the handle bar and the lateral reinforcements for the application of the windproof buttons. To allow this use, the roll holders for the 50 mm and 10 mm tape are applied to the machine.

To facilitate processing, the model with a mobile bench is available.
This version allows you to use the welding machine for the production of customized mosquito nets and in 6 m bars.

 

 

 

Technical information

Maximum length – mm 3000

Maximum depth – mm 550

Max height – mm 1400

Mains voltage – V 220

Absorbed power – Kw 2

Operating pressure – Bar 4/5

Weight – kg 180

For information on prices and delivery times, you can contact us by phone or email with your requests.

 

ST3

, , , , , , , ,

Manual thermal welder 2 or 3 m

ST3
ST3
ST3

This welding machine model is available in versions with useful welding of 2 or 3 meters.

The machine is equipped with an electronic control that allows you to set, by means of a touch-screen panel, all the data necessary for welding.

Using a digital control it was possible to eliminate the door that protects the welding area in order to facilitate visibility during the machining cycle while maintaining the same level of safety.

For the production of mosquito nets, the roll holders for the 50 mm and 10 mm webbing are applied to the welding machine.

For those who need to produce 6-meter bars of mosquito nets, the 3-meter ST3 welding machine can be equipped with a 6-meter mobile support bench. Simultaneously with the progress of the welds, the tape and the cord are automatically inserted.
Using the 3 m welding bars it is possible to obtain an excellent result in a very short time.

For the production of roller blinds and blackout blinds, an automatic system has recently been added to the welding machine for the execution of the lower pocket (cord holder for handle bar). After placing the sheet in position, with a single “START” the complete folding and welding cycle is carried out.

 

Technical information

Maximum length – mm 3600/4600

Maximum depth – mm 1060

Max height – mm 1600

Mains voltage – V 380 5 poles

Absorbed power – Kw 5

Operating pressure – Bar 4/5

Weight – kg 340/400

For information on prices and delivery times, you can contact us by phone or email with your requests.

 

BTM

, , , , , , ,

Manual bench for fabric cutting

BTM
BTM
BTM

The manual bench BTM1 is a fabric cutting module such as: netting for mosquito nets, blackout fabrics, filtering fabrics or fabrics similar to those mentioned with a blade cut.

The machine is suitable for those who want to start a sheet replacement business or need to cut fabrics in a limited number.
It is possible to vary all the dimensions to adapt the bench to the end user as much as possible.
A small manual movement trolley equipped with a razor blade allows you to perform a perfectly linear cut.

The easy-to-clean PVC support surface is equipped with a stop for reference of the fabric size. It is also possible to apply millimeter lines to easily find the necessary measure.

Several options are available to adapt the counter to your needs, including:

  • Strike parallel to the cut with handwheel and digital display for measurement;
  • Trolley with battery-powered rotating blade cutter;
  • “Cradle” roll holder with rollers;
  • Cutting trolley motor.

The structure is completely made of structural aluminum profiles, therefore, even in the event of subsequent modifications it is very simple and practical.
It does not require any particular maintenance. A superficial cleaning will keep this equipment perfect for many years.

 

Technical information

Maximum length – mm 3100

Maximum depth – mm 3400

Max height – mm 1100

Operating pressure – Bar 4/5

Weight – kg 200

For information on prices and delivery times, you can contact us by phone or email with your requests.

 

MT

, , , , , , , , , ,

Fabric cutting bench available in different versions:

– MT-DUAL – hybrid ultrasonic cutting / rotary blade
– MT-SONIC – ultrasonic cutting
– MT-ROT – rotary blade cutting

Banco per taglio tessuti.
Banco per taglio tessuti.
Banco per taglio tessuti.
Banco per taglio tessuti.

The MT-DUAL model is recommended as it is not always necessary to carry out the welding on all fabrics, therefore, using the rotary blade cutting reduces the wear of the ultrasonic apparatus and consequently the maintenance costs.

Using ultrasonic cutting on partially resinated materials, a light welding is performed simultaneously with the cutting, which prevents the weft of the fabric from flaking off.

The rotary blade cutter is used to cut fabrics that do not require micro welding.

Through a touch-screen panel it is possible to quickly set all the settings necessary for processing.

Manual positioning of the fabric on the work surface.

The worktop is equipped with a gauge bar with a meter to quickly position and squar the material.

For this model is also available a roll holder with translatable rollers to facilitate the positioning of the fabric.

Normally a useful cutting measure of 3 meters is provided with a 3 meter support bench.
All measurements are agreed with the customer during the order. This allows to obtain the maximum adaptability for each user.
We are available to discuss any changes or additions.

 

Technical information

Maximum length – mm 3735

Maximum depth – mm 4260

Max height – mm 1500

Mains voltage – V 220

Absorbed power – Kw 1

Operating pressure – Bar 5/6

Weight – kg 380

For information on prices and delivery times, you can contact us by phone or email with your requests.

 

Load More