Get a quote

Tel: 0039 049 9202276   

ASK FOR A QUOTE

Menu

bench

ST1S200

, , , , , , , ,

Manual thermal welder 1,5 m

ST1S200
ST1S200
ST1S200

The ST1S200 is a manual thermal welding machine dedicated to the production of mosquito nets.

The 220 V voltage and low consumption (2 kw) allows this welding machine to be used even in companies with small systems, while maintaining a high level of quality and quantity of welding.

The manual welding machine is equipped with an electronic control that allows you to set, by means of a touch-screen panel, the few data necessary to carry out the welding. There are no mechanical timers as they are subject to wear and could lead to reliability problems.

The welding machine is equipped with 1,5 m and 10 mm wide electrodes.
The fixed support bench is 3 meters long.
To increase the ease of use, it is possible to have the fixed support bench of 6 meters.

For the production of mosquito nets, it is possible to weld both the pocket on the bottom for the handle bar and the lateral reinforcements for the application of the windproof buttons. To allow this use, the roll holders for the 50 mm and 10 mm tape are applied to the machine.

To facilitate processing, the model with a mobile bench is available.
This version allows you to use the welding machine for the production of customized mosquito nets and in 6 m bars.

 

 

Technical information

Maximum length – mm 3000

Maximum depth – mm 550

Max height – mm 1400

Mains voltage – V 220

Absorbed power – Kw 2

Operating pressure – Bar 4/5

Weight – kg 180

For information on prices and delivery times, you can contact us by phone or email with your requests.

 

BTM

, , , , , , ,

Manual bench for fabric cutting

BTM
BTM
BTM

The manual bench BTM1 is a fabric cutting module such as: netting for mosquito nets, blackout fabrics, filtering fabrics or fabrics similar to those mentioned with a blade cut.

The machine is suitable for those who want to start a sheet replacement business or need to cut fabrics in a limited number.
It is possible to vary all the dimensions to adapt the bench to the end user as much as possible.
A small manual movement trolley equipped with a razor blade allows you to perform a perfectly linear cut.

The easy-to-clean PVC support surface is equipped with a stop for reference of the fabric size. It is also possible to apply millimeter lines to easily find the necessary measure.

Several options are available to adapt the counter to your needs, including:

  • Strike parallel to the cut with handwheel and digital display for measurement;
  • Trolley with battery-powered rotating blade cutter;
  • “Cradle” roll holder with rollers;
  • Cutting trolley motor.

The structure is completely made of structural aluminum profiles, therefore, even in the event of subsequent modifications it is very simple and practical.
It does not require any particular maintenance. A superficial cleaning will keep this equipment perfect for many years.

 

Technical information

Maximum length – mm 3100

Maximum depth – mm 3400

Max height – mm 1100

Operating pressure – Bar 4/5

Weight – kg 200

For information on prices and delivery times, you can contact us by phone or email with your requests.

 

TR6000

, , , , , , , , ,

Cutting nets in 6m “KIT”

Banco da taglio automatico per zanzariere in kit da taglio
Banco da taglio automatico per zanzariere in kit da taglio
Banco da taglio automatico per zanzariere in kit da taglio
Banco da taglio automatico per zanzariere in kit da taglio

Semi-automatic electronic cutting bench for cutting nets in 6 m KIT.

The TR6000 is the most suitable bench to perform the first operations for the production of cutting mosquito nets.

In fact, at the end of the cycle we will have the net cut and wrapped on the tube.

To complete the bar production cycle, the 6 m ST6000 thermal welding machine can be placed next to the bench

which welds the pocket for the handle bar by directly inserting the webbing, lanyard, handle bar and box.

It is possible to work with programmed or single continuous cutting.

Quick programming via touch-screen panel.

To reduce production times and workstations as much as possible, it is possible to install the KIT for applying the double-sided adhesive on the tube on which the mesh will then be glued (manually).

The KIT also includes the automatic winding of the sheet after processing is complete.

A set of photoelectric barriers ensures maximum operator protection during the various phases of the cycle.

 

Technical information

Maximum length – mm 7100

Maximum depth – mm 3220

Max height – mm 1370

Mains voltage – V 380

Absorbed power – Kw 1

Operating pressure – Bar 4/5

Weight – kg 755

For information on prices and delivery times, you can contact us by phone or email with your requests.

 

SR4

, , , , , , , , , ,

Net welding cutting table

SR4
Banco per taglio saldatura rete per zanzariere
SR4
SR4

Electronic bench for cutting and welding the net for the production of mosquito nets with the application of the lateral reinforcement tape for the windproof buttons.
The bench can be used to cut to size blinds or other similar materials.
The machine is controlled by a PLC, the data necessary for processing is entered via a touch-screen panel. It is also possible to load the data through a barcode reader in order to eliminate any errors in the programming phase.
The current version is the result of years of updates following, in addition to the evolution of mechanics and systems, the advice and changes requested by users.
The bench is available in the version with a fixed magazine of 3 rolls (MOD. SR4), with an automatic magazine of 12 rolls inserted in the structure (MOD. SR4-12).
Furthermore, for those who need to use the bench also for the production of cutting mosquito nets, it is possible to integrate the bench with a drag measure of 6 meters and the insertion of the double-sided tape on the tube. At the end of the grid application, an electric motor carries out the winding.

 

 

Technical information

Maximum length – mm 4300

Maximum depth – mm 3650

Max height – mm 1440

Mains voltage – V 380 5 poles

Absorbed power – Kw 2

Operating pressure – Bar 5/6

Weight – kg 660

For information on prices and delivery times, you can contact us by phone or email with your requests.

 

FP-10C – 10 heads drilling machine for drilling of plissé mosquito nets.

, , , , , , , , , , , ,

DESCRIPTION

Semi-automatic drilling machine for plissè mosquito nets production.

This machine is designed for the production of plissè on KIT.

After positioning the carriages, only around 15 seconds to complete up to 10 holes simultaneously.

From the panel you can select how many and witch drilling machines to use. This reduces the power consumption, component wear and makes the machine very flexible.

On request it is adaptable to various thicknesses of pleating (10, 15 and 20 mm).

The transition from one thickness to another is very simple, fast and does not require the use of tools.

The positioning of the drilling trolleys is facilitated by the millimetric line placed on the guide profile.

Drilling is performed by using a step/step motors. This allows total control over the speed of rotation by getting the best result with respect to the material to be drilled.

A series of pneumatic pressers maintains compact and in position the net during the drilling cycle.

TECHNICAL INFORMATION

MAXIMUM LENGTH – mm 3590
MAXIMUM DEPTH – mm 805
MAX HEIGHT – mm 1630
WEIGHT – kg 300

For information about prices and delivery times, please contact us by phone or mail.

FP-10C

Foratrice 10 teste per rete zanzariere plissé da taglio.

Fora plissè
Fora plissè
Fora plissè
Fora plissè

Questa macchina è progettata per la produzione di plissè su KIT.

Dopo aver posizionato i carrelli, solo circa 15 secondi per completare fino a 10 fori contemporaneamente.

Dal pannello è possibile selezionare quante e quali trapani utilizzare. Ciò riduce il consumo energetico, l’usura dei componenti e rende la macchina molto flessibile.

A richiesta è adattabile a vari spessori di plissettatura (10, 15 e 20 mm).

Il passaggio da uno spessore all’altro è molto semplice, veloce e non richiede l’uso di attrezzi.

Il posizionamento dei carrelli di foratura è facilitato dalla linea millimetrica posta sul profilo guida.

La foratura viene eseguita utilizzando un motore passo-passo. Questo permette il controllo totale della velocità di rotazione ottenendo il miglior risultato rispetto al materiale da forare.

Una serie di pressori pneumatici mantiene compatta e in posizione la rete durante il ciclo di perforazione.

INFORMAZIONI TECNICHE

LUNGHEZZA MASSIMA – mm 3590

PROFONDITÀ MASSIMA – mm 805

ALTEZZA MASSIMA – mm 1630

PESO – kg 300

Per informazioni su prezzi e tempi di consegna, vi preghiamo di contattarci telefonicamente o via mail.

Load More