Product

21 December 2021

SBA

Emme ZetaProduct apply, application, automatic, adhesive, emme zeta, macchine, tape, Presentation, tube

Automatic station for 6 m double-sided adhesive application

The SBA is an automatic machine for the application of double-sided tape on the tube for winding the mosquito nets without any intervention by the operator.

To allow continuous processing, it is possible to insert a good number of aluminum tubes which the machine will then load autonomously.

The double-sided tape is applied in both directions of travel in order to minimize downtime.

The automatic cutting of the double-sided tape allows automatic unloading of the finished tube directly into an external collection basket.

The two “open” walls of the structure are protected by photoelectric barriers that prevent any possibility of reaching dangerous moving parts by operators.

All programming data is entered via an easy-to-read touch-screen panel.

Unlike the semi-automatic models, this machine does not require any intervention by the operator.
By programming the number of cycles to be performed, the machine will automatically stop waiting for intervention.

Hardened steel carriages and stepper motor and digital control allow for fast and accurate cycles.

Technical information

Maximum length – mm 7400

Maximum depth – mm 1600

Max height – mm 1560

Mains voltage – V 220

Absorbed power – Kw 2

Operating pressure – Bar 4/5

Weight – kg 600

For information on prices and delivery times, you can contact us by phone or email with your requests.

21 December 2021

ST1S200

Emme ZetaProduct bench, tape, macchine, Presentation, roll, welder, welding, techniques, thermal

Manual thermal welder 1,5 m

The ST1S200 is a manual thermal welding machine dedicated to the production of mosquito nets.

The 220 V voltage and low consumption (2 kw) allows this welding machine to be used even in companies with small systems, while maintaining a high level of quality and quantity of welding.

The manual welding machine is equipped with an electronic control that allows you to set, by means of a touch-screen panel, the few data necessary to carry out the welding. There are no mechanical timers as they are subject to wear and could lead to reliability problems.

The welding machine is equipped with 1,5 m and 10 mm wide electrodes.
The fixed support bench is 3 meters long.
To increase the ease of use, it is possible to have the fixed support bench of 6 meters.

For the production of mosquito nets, it is possible to weld both the pocket on the bottom for the handle bar and the lateral reinforcements for the application of the windproof buttons. To allow this use, the roll holders for the 50 mm and 10 mm tape are applied to the machine.

To facilitate processing, the model with a mobile bench is available.
This version allows you to use the welding machine for the production of customized mosquito nets and in 6 m bars.

Technical information

Maximum length – mm 3000

Maximum depth – mm 550

Max height – mm 1400

Mains voltage – V 220

Absorbed power – Kw 2

Operating pressure – Bar 4/5

Weight – kg 180

For information on prices and delivery times, you can contact us by phone or email with your requests.

21 December 2021

ST3

Emme ZetaProduct emme zeta, tape, blackout, Presentation, roll, welder, welding, pocket, thermal

Manual thermal welder 2 or 3 m

This welding machine model is available in versions with useful welding of 2 or 3 meters.

The machine is equipped with an electronic control that allows you to set, by means of a touch-screen panel, all the data necessary for welding.

Using a digital control it was possible to eliminate the door that protects the welding area in order to facilitate visibility during the machining cycle while maintaining the same level of safety.

For the production of mosquito nets, the roll holders for the 50 mm and 10 mm webbing are applied to the welding machine.

For those who need to produce 6-meter bars of mosquito nets, the 3-meter ST3 welding machine can be equipped with a 6-meter mobile support bench. Simultaneously with the progress of the welds, the tape and the cord are automatically inserted.
Using the 3 m welding bars it is possible to obtain an excellent result in a very short time.

For the production of roller blinds and blackout blinds, an automatic system has recently been added to the welding machine for the execution of the lower pocket (cord holder for handle bar). After placing the sheet in position, with a single “START” the complete folding and welding cycle is carried out.

Technical information

Maximum length – mm 3600/4600

Maximum depth – mm 1060

Max height – mm 1600

Mains voltage – V 380 5 poles

Absorbed power – Kw 5

Operating pressure – Bar 4/5

Weight – kg 340/400

For information on prices and delivery times, you can contact us by phone or email with your requests.

21 December 2021

ST6000

Emme ZetaProduct automatic, tape, kit, macchine, measure, Presentation, welding, pocket, mosquito net

Semi-automatic thermal welding machine

The ST6000 is a thermal welding machine (6 m useful welding in two steps) built to weld a 50 mm fiberglass tape pocket on a mosquito net, blackout or other similar materials for the application of the handle bar.

For the production of nets for the KIT (6 m), in addition to the webbing it is also possible to insert the fixing cord and it is possible to insert the handle bar each time that at the end of the cycle will be extracted together with the net.

On request, it is possible to adapt the simultaneous insertion of the box as well.

In this way, at the end of the cycle there will be no other steps to be carried out.

The machine is equipped with an electronic control that allows you to set, via a comfortable touch-screen panel, the few data necessary for processing.

The welding machine can also be used for the production of customized mosquito nets.

Despite the size and the amount of work that this welding machine can carry out, the electrical consumption remains low (only 2 kw).

Being a resistance welding, the machine does not require major maintenance and is inexpensive to maintain.

USE OF THE WELDING MACHINE FOR THE PRODUCTION OF CUSTOMIZED MOSQUITO NETS

USE OF THE WELDING MACHINE FOR THE PRODUCTION OF MOSQUITO NETS IN KIT

Technical information

Maximum length – mm 7100

Maximum depth – mm 730

Max height – mm 1370

Mains voltage – V 380

Absorbed power – Kw 5

Operating pressure – Bar 4/5

Weight – kg 510

For information on prices and delivery times, you can contact us by phone or email with your requests.

21 December 2021

PB1000

Emme ZetaProduct automatic, macchine, machine, storage, Presentation, production, roll, techniques, curtain, curtains, mosquito net

Motorized roll holder

Motorized roll holder with assisted unwinding for heavy rolls.

The use of large reels allows you to obtain cheaper prices of the raw material. It also reduces the downtime required to replace the rolls and restore the workbench.

Equipped with an autonomous system, therefore, able to work with any bench or machinery even if not of our production.

It is possible to connect the safety devices of the roll holder with those of the workbench.
In this way, in the event of an emergency, the roll will also stop to prevent dangerous accidents.

The unwinding speed adapts to the dragging speed, this allows you to use this equipment even manually with very heavy rolls.

Technical information

Maximum length – mm 3155

Maximum depth – mm 1200

Max height – mm 970

Mains voltage – V 220

Absorbed power – Kw 1

Weight – kg 255

For information on prices and delivery times, you can contact us by phone or email with your requests.