Presentation

Company presentation

20 November 2013

LV3 – Automatic work station for resinated vertical blinds.

Emme ZetaPresentation automatic, bench, building, macchine, measure, Presentation, production, welder, welding, techniques, curtain, curtains

Stazione taglio e saldatura per tende verticali.

Stazione taglio e saldatura per tenda verticale. — Stazione taglio e saldatura per tende verticali.

The LV3 is a cutting, bending and welding station for the production of resinous vertical curtains.

The machine is equipped with a loader for the winches, during the cycle will be automatically inserted.

The double clamp allows you to optimize production times. As a trolley keeps the curtain in tension to the desired size, the other carriage returns to the waiting position near the cutting point.

The machine is equipped with a PLC control that allows it to operate safely by combining ease of use and productivity thanks to the insertion of all data via a touch-screen panel.

All measurement and welding data are intuitive and easy to understand.

On request it is possible to install the program for the calculation of curtains for sloping ceiling.
By entering a few data the machine will automatically calculate the number of bands to cut and length.

With these dimensions it is possible to produce curtains of 4 mt.
However, it is possible to vary all the measures in order to obtain the most suitable machinery for every need.

MAXIMUM LENGTH – mm 6150
MAXIMUM WIDTH – mm 600
MAX HEIGHT – mm 1400
WEIGHT – kg 490
ABSORBED POWER – kw 1
VOLTAGE – Volt 220
PNEUMATIC PRESSURE – bar 5/6
PRODUCTIVITY AVARAGE – pieces/h 200

For price information and delivery times you can contact us by telephone or by mail with your requests.

4 October 2013

(Italiano) FR – fustella per foro bottone antivento

Emme ZetaPresentation equipment, tape, drilling, measure, blackout, Presentation, production, techniques, curtain, curtains, mosquito net

Sorry, this entry is only available in Italian.

4 October 2013

R1

Emme ZetaPresentation opening, remove, automatic, automation, box, macchine, Presentation, opener, mosquito net

Automatic shearing machine

Description

The R1 is a machine for removing the removable part of the various bins used for the production of awnings
mosquito nets to allow the passage of the fabric.

The rollers that perform the tearing are self-adjusting, so the machine does not need any adjustment to switch between working on the box or on the side guides.

It is possible to use the machine both to work the whole 6 m box or you can decide to remove the waste after having cut the profile to the desired length.

During the removal of the waste, it is broken into small pieces and then falls into the collection tank.

All rollers and blades for cutting the chip are made of hardened and ground steel.
Being equipped with a large engine, it has no problem doing long work cycles.

An access door with interlocked switch prevents the operator from leaving moving parts during maintenance, cleaning or emptying the recovery tank.

Technical information

Maximum length – mm 800

Maximum depth – mm 600

Max height – mm 900

Mains voltage – V 380 – 5 poles

Absorbed power – Kw 0,75

Weight – kg 120

For information on prices and delivery times, you can contact us by phone or email with your requests.

2 October 2013

(Italiano) FB1 – FORA BARRAMANIGLIA

Emme ZetaPresentation handle bar, handelbar, emme zeta, drilling, guide, Presentation, mold, curtain, curtains, mosquito net

Sorry, this entry is only available in Italian.

2 October 2013

Spring loader

Emme ZetaPresentation load, spring loader, electronic, spring, Presentation, production, techniques, curtain, curtains, mosquito net

CM3

Description CM3

The unit loads electronic springs for the production of insect screens.
It is available in two versions to adapt to different production methods.
The CM3 has a mobile “screwer” which allows you to work on the bench and load the spring directly inside the box.
Furthermore, the load-bearing structure of the control panel has a low weight, so it can be moved without major problems.
This version is equipped with a touch-screen panel for selecting the desired charge. It has 12 programmable memories that can be changed at any time by the operator to obtain maximum adaptability to any type of product.
The handle is obtained from a screwdriver modified to be fed continuously. In addition to guaranteeing an ergonomic handle, this ensures the possibility of continuous work without the need to recharge the batteries.

Technical information

Maximum length – mm 700

Maximum depth – mm 700

Max height – mm 1180

Mains voltage – V 220

Absorbed power – Kw 1

Weight – kg 30

For information on prices and delivery times, you can contact us by phone or email with your requests.

CM2

Description CM2

The CM2 model is the fixed version for loading the springs before inserting them into the insect screen.
This allows you to store the springs already loaded and ready for assembly.
Unlike the CM3 model, this version must be fixed to a workbench.

Technical information

Maximum length – mm 520

Maximum depth – mm 350

Max height – mm 1000

Mains voltage – V 380

Absorbed power – Kw 0,5

Weight – kg 40

For information on prices and delivery times, you can contact us by phone or email with your requests.