(Italiano) FR – fustella per foro bottone antivento
Sorry, this entry is only available in Italian.
Emme Zeta
About Emme Zeta
Posts by Emme Zeta :
R1
Automatic shearing machine
Description
The R1 is a machine for removing the removable part of the various bins used for the production of awnings
mosquito nets to allow the passage of the fabric.
The rollers that perform the tearing are self-adjusting, so the machine does not need any adjustment to switch between working on the box or on the side guides.
It is possible to use the machine both to work the whole 6 m box or you can decide to remove the waste after having cut the profile to the desired length.
During the removal of the waste, it is broken into small pieces and then falls into the collection tank.
All rollers and blades for cutting the chip are made of hardened and ground steel.
Being equipped with a large engine, it has no problem doing long work cycles.
An access door with interlocked switch prevents the operator from leaving moving parts during maintenance, cleaning or emptying the recovery tank.
Technical information
Maximum length – mm 800
Maximum depth – mm 600
Max height – mm 900
Mains voltage – V 380 – 5 poles
Absorbed power – Kw 0,75
Weight – kg 120
For information on prices and delivery times, you can contact us by phone or email with your requests.
(Italiano) FB1 – FORA BARRAMANIGLIA
Sorry, this entry is only available in Italian.
Spring loader
CM3
Description CM3
The unit loads electronic springs for the production of insect screens.
It is available in two versions to adapt to different production methods.
The CM3 has a mobile “screwer” which allows you to work on the bench and load the spring directly inside the box.
Furthermore, the load-bearing structure of the control panel has a low weight, so it can be moved without major problems.
This version is equipped with a touch-screen panel for selecting the desired charge. It has 12 programmable memories that can be changed at any time by the operator to obtain maximum adaptability to any type of product.
The handle is obtained from a screwdriver modified to be fed continuously. In addition to guaranteeing an ergonomic handle, this ensures the possibility of continuous work without the need to recharge the batteries.
Technical information
Maximum length – mm 700
Maximum depth – mm 700
Max height – mm 1180
Mains voltage – V 220
Absorbed power – Kw 1
Weight – kg 30
For information on prices and delivery times, you can contact us by phone or email with your requests.
CM2
Description CM2
The CM2 model is the fixed version for loading the springs before inserting them into the insect screen.
This allows you to store the springs already loaded and ready for assembly.
Unlike the CM3 model, this version must be fixed to a workbench.
Technical information
Maximum length – mm 520
Maximum depth – mm 350
Max height – mm 1000
Mains voltage – V 380
Absorbed power – Kw 0,5
Weight – kg 40
For information on prices and delivery times, you can contact us by phone or email with your requests.
(Italiano) TA – RULLIERA PER TRONCATRICE
Sorry, this entry is only available in Italian.